top of page

How to Use the Gas Stove

1. Lighting the Burner:
• Press the knob corresponding to the burner you want to use.
• Turn the knob to the ignition position (⚡️). The burner will ignite after a few seconds.
• Once the burner is lit, release the knob.

2. Adjusting the Flame:
• After the burner is lit, you can adjust the flame by turning the knob to your desired level.
Safety Tips:
• Always make sure the knob is fully turned off when you’re done using the stove.

Water Filter Instructions

1. Filling the Filter:
• Simply pour water into the top of the filter.
• The water will automatically pass through the filtration system and come out purified from the lower spout.
2. Usage Guidelines:
• Use Only Water: Do not pour any liquids other than water into the filter, as this could damage the filtration system.

Vent Hood

1. To turn on the ventilation, simply pull out the stainless steel panel, and the extraction fan will automatically activate.


2. For the fan speed, you can choose between speed I and speed II.


3. To turn it off, just close the compartment again.
bottom of page